在工業生產與社會活動的背后，危險廢物如同潛伏的 “環境殺手”，若處置不當，會對生態與健康造成嚴重威脅。危廢暫存間作為危險廢物從產生到最終處理的中間樞紐，扮演著 “安全驛站” 的關鍵角色。它憑借嚴謹的功能設計與先進的技術手段，將危險隔絕在可控范圍內，為危險廢物的規范管理筑牢第一道防線。

　　Behind industrial production and social activities, hazardous waste is like a hidden "environmental killer". If not disposed of properly, it can pose a serious threat to ecology and health. The hazardous waste temporary storage room serves as an intermediate hub for the generation and final treatment of hazardous waste, playing a key role as a "safety station". It relies on rigorous functional design and advanced technological means to isolate hazards within a controllable range, laying a solid first line of defense for the standardized management of hazardous waste.

　　1. 分類存儲：讓危險 “各就其位”

　　1. Classified storage: Let danger be "in its own place"

　　危廢暫存間的首要功能是實現危險廢物的分類管理。不同種類的危險廢物（如廢酸、廢堿、重金屬廢液、含油抹布、醫療廢物等）具有不同的物理化學性質，混合存放可能引發化學反應，加劇泄漏風險。暫存間內設置獨立的存儲區域，通過地面劃線、標識牌明確區分不同類別，甚至配備專屬容器（如防腐蝕的聚乙烯儲罐、防爆的金屬密閉桶）。例如，具有揮發性的有機廢物與易產生火花的廢礦物油需分區域存放，兩者間距需符合防火規范；固態危廢與液態危廢需通過防滲托盤、圍堰進一步隔離，防止滲濾液交叉污染。這種 “精準分區” 的存儲方式，不僅便于后續處理時的高效轉運，更從源頭避免了風險疊加。

　　The primary function of the hazardous waste temporary storage room is to achieve classified management of hazardous waste. Different types of hazardous waste (such as waste acid, waste alkali, heavy metal waste liquid, oily cloth, medical waste, etc.) have different physical and chemical properties, and mixed storage may cause chemical reactions, exacerbating the risk of leakage. Set up independent storage areas in the temporary storage room, clearly distinguish different categories through ground markings and signs, and even equip dedicated containers (such as corrosion-resistant polyethylene storage tanks and explosion-proof metal sealed drums). For example, volatile organic waste and spark prone waste mineral oil need to be stored in separate areas, with a distance that complies with fire safety regulations; Solid hazardous waste and liquid hazardous waste need to be further isolated through impermeable trays and cofferdams to prevent cross contamination of leachate. This "precise partitioning" storage method not only facilitates efficient transportation during subsequent processing, but also avoids risk accumulation from the source.

　　2. 風險控制：全天候守護 “零泄漏”

　　2. Risk control: guarding "zero leakage" 24/7

　　危險廢物在暫存期間可能因包裝破損、外界環境影響（如高溫、雨水）產生泄漏、揮發等問題，危廢暫存間通過多重措施將風險降至最低。

　　During the temporary storage period, hazardous waste may experience leakage, volatilization, and other issues due to packaging damage or external environmental factors such as high temperatures and rainwater. The hazardous waste temporary storage room takes multiple measures to minimize the risk.

　　防泄漏設計：液態危廢存儲區設置圍堰或導流槽，圍堰高度不低于液體容器的 110%，確保意外泄漏時液體被有效攔截；固態危廢下方鋪設防滲漏托盤，托盤材質耐酸堿、耐高溫，且具有一定承重能力。

　　Leak prevention design: Set up cofferdams or diversion channels in the liquid hazardous waste storage area, with the height of the cofferdam not less than 110% of the liquid container, to ensure that the liquid is effectively intercepted in case of accidental leakage; Lay anti-seepage trays underneath solid hazardous waste, with tray materials that are acid and alkali resistant, high temperature resistant, and have a certain load-bearing capacity.

　　環境控制：針對易揮發的危廢，暫存間配備通風系統，保持室內空氣流通，降低有害氣體濃度；對于對溫度敏感的危廢（如某些化學試劑），設置溫控設備，將溫度控制在安全區間，避免因高溫引發分解或爆炸。

　　Environmental control: For volatile hazardous waste, the temporary storage room is equipped with a ventilation system to maintain indoor air circulation and reduce the concentration of harmful gases; For temperature sensitive hazardous waste (such as certain chemical reagents), temperature control equipment should be installed to keep the temperature within a safe range and avoid decomposition or explosion caused by high temperatures.

　　應急防護：配備充足的應急物資，如吸附棉、中和劑、滅火器、防護手套等，一旦發生小規模泄漏，現場人員可迅速采取堵漏、吸附、中和等措施，防止污染擴散。

　　Emergency protection: Equipped with sufficient emergency supplies such as absorbent cotton, neutralizing agents, fire extinguishers, protective gloves, etc. In the event of a small-scale leak, on-site personnel can quickly take measures such as plugging, adsorption, neutralization, etc. to prevent pollution from spreading.

　　3. 合規中轉：銜接 “產生” 與 “處置” 的橋梁

　　3. Compliance transfer: a bridge connecting "generation" and "disposal"

　　危廢暫存間是滿足環保法規要求的必要環節。根據相關規定，危險廢物不能長期堆積在產生場所，需在暫存間內短期存放并及時轉運至有資質的處理機構。暫存間內建立完善的臺賬管理系統，記錄每一批次危廢的產生時間、種類、數量、包裝狀態、出入庫時間及接收單位信息，確保 “來源可查、去向可追”。這種合規的中轉功能，既避免了企業因違規存儲面臨的法律風險，也為后續處理提供了清晰的原始數據，實現危險廢物從產生到處置的全鏈條閉環管理。

　　The temporary storage room for hazardous waste is a necessary link to meet environmental regulations. According to relevant regulations, hazardous waste cannot be accumulated in the production site for a long time. It needs to be stored in a temporary storage room for a short period of time and promptly transported to qualified treatment institutions. Establish a comprehensive ledger management system in the temporary storage room to record the generation time, type, quantity, packaging status, inbound and outbound time, and receiving unit information of each batch of hazardous waste, ensuring "traceable source and traceable destination". This compliant transfer function not only avoids legal risks faced by enterprises due to illegal storage, but also provides clear raw data for subsequent processing, achieving closed-loop management of hazardous waste from generation to disposal.

　　本文由危廢暫存間友情奉獻.更多有關的知識請點擊:http://www.xjm6385.cn我們將會對您提出的疑問進行詳細的解答，歡迎您登錄網站留言.

　　This article is a friendly contribution from catalytic combustion equipment For more information, please click: http://www.xjm6385.cn We will provide detailed answers to your questions. You are welcome to log in to our website and leave a message